FloPlast ROS1AG Square Line Gutter Running Outlet in Grey 114mm
Product code: W4908
A gutter running outlet designed to connect two 114mm square line gutters to a 65mm square downpipe.This outlet has an anthracite grey finish compatible with our FloPlast grey square line downpipe,... Read more
Description
A gutter running outlet designed to connect two 114mm square line gutters to a 65mm square downpipe.
This outlet has an anthracite grey finish compatible with our FloPlast grey square line downpipe, product code W4911, and FloPlast grey square line gutter, product code W4906.
To install, the gutters are clipped in on either side of the outlet. This design ensures a secure connection. The bottom part of the fitting features a moulded spigot that fits inside the 65mm square downpipe, creating a watertight seal.
The outlet has moulded screw holes, which allow it to be fixed back to the fascia board, ensuring that the outlet is securely fastened in place.
The positioning of the running outlet is typically determined by the location of existing drainage connections. However, if you are designing a new gutter system, it's recommended to place the outlet centrally in the gutter run. This is to increase the overall capacity of the gutter system compared to placing the outlet at one end.
If the outlet is installed at the end of a run, a short piece of gutter with an external stop end attached is used to extend the gutter past the end of the building's structure. This extension helps catch any rainfall from overhanging tiles, preventing water from spilling onto the ground or causing damage to the building's exterior.
To prevent pipes from clogging with leaves and moss, it is advisable to install a leaf guard inside the outlet. A leaf guard typically resembles a small birdcage and sits in the neck of the running outlet. The leaf guard is designed to be discreet and is usually not visible from ground level.
Key Features
Designed to connect two 114mm square line gutters to a 65mm square downpipe
Gutters are easily clipped in on either side of the outlet
A moulded spigot fits inside the 65mm square downpipe creating a watertight seal
The outlet has moulded screw holes allowing it to be fixed back to the fascia board
Leaf guard can easily be installed inside the outlet
| Brand | Floplast |
| Size | 114mm / 65mm |
| Colour | Anthracite |
| Material | PVC-u |
| Height Description | 131mm |
| Width | 134mm |
| Length | 225mm |
| Type | Running Outlets |
| Shape Description | Square |
£7.40
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
